🔧 Complete Specs Included
Starter Motor Replacement on 2012-2015 Honda Civic
Comprehensive guide to unbolt and replace starter motor assembly located under the intake manifold. Mapped specifically for 2013 Honda Civic Si (2.4L I4 (K24Z7)).
Step 1
Disconnect Battery & Remove Intake Manifold Bracket
Disconnect negative battery cable. To gain access to the starter situated behind the radiator, remove the intake manifold support bracket underneath the vehicle.
🔧 Fastener: 12mm Bracket Bolt • Torque Spec: 17 ft-lbs
Step 2
Unbolt Starter Cables
Remove the plastic weather protection cap. Unbolt the B-terminal starter cable (12mm nut) and pull off the solenoid S-terminal trigger connector.
🔧 Fastener: 12mm B-Terminal Nut • Torque Spec: 8 ft-lbs
Step 3
Remove Starter Bolts
Remove the two long mounting bolts holding the starter assembly to the engine block, slide the starter out, and drop in the replacement assembly.
🔧 Fastener: 14mm Starter Mounting Bolt • Torque Spec: 47 ft-lbs